Yanmar 4LHA-HTP User Manual

4.8 Operation Procedure
The following diagram shows the procedures for operation explained up to this point.
Parts of the operation may differ depending on the marine drive and remote controi system being
used. Accompanying operation manuals should be read carefully and understood.
Incpecfcn Bvl'irt Sljriinijl
ttitim; thf> Ergmt
Marine Drive Clutch
Clutch Control Lever
Starter Switch
(DOFF => ON
©ON =*• START
=>ON
Alarm Lamps
Control Panel
Warming-up
Speed Lever
Put in NEUTRAL
t Checking the Alarm Devices
• Tum the key for no longer than 15 sees.
Remove hand from key after starting.
Checking for Problems
Low Speed Position
1 SOOrpm or lower for 5 mins. or longer
Checking the Engine Dunng
Operation
I
Starting Operation I
Marine Drive Clutch
Speed Lever
Engage Clutch
Forward or Reverse
Adjust Speed
Stopping the Boat/Prepanng
to Stop the Engine
I
Speed Lever
~~r~
Marine Drive Clutch
I
Speed Lever
Low Speed Position
lOOOrpm or lower
Put in NEUTRAL
Low SpeecKs+High Speed
Racing the Era.nt.
Repeat Several Times
Speed Lever
Low Speed Position
lOOOrpm or lower
Cooling Down the Engine*| For 5 mins. or longer
Starter Switch
Stop Button
I
ON=*OFF
Engine Stops
-39-

Yanmar 4LHA-HTP Specifications

General

Brand	Yanmar
Model	4LHA-HTP
Category	Engine
Language	English