Chapter 8 Remote Control
3. Remote Control Inspection
4LHA Seri,
3.
Remote
Control
Inspection
(1) When the control lever movement does not coincide
with
operation of the
engine,
check the cable end stop
nut to see whether or not it is loose, and readjust/
retighten when necessary.
Reverse
Neutral
V
Shitt in f"^
Shi,, in
Forward
Throttle
Free
throttle
(2) Too many bends
(turns)
in the
cable
or
bends
at too
extreme an angle
will
make it
difficult
to
turn
the
handle.
Reroute the cable to reduce the number of
bends
or enlarge the bending radius as much as
possible
(to 200mm or more).
(3) Check for loose cable bracket/clamp bolts or nuts and
retighten as necessary.
(4)
Check
cable connection
screwheads,
cable
sleeves
and
other metal parts for rust or
corrosion.
Clean
off minor
rust and wax or grease the parts. Replace if the parts
are heavily rusted or
corroded.
8-5
To Next Page
Loading...
Need help?
General
