Yealink CTP18 Administrator's Guide

| Basic Settings | 119
Time Zone Time Zone Name Time Zone Time Zone Name
+01:00 Czech Republic (Prague) +10:30 Australia (Lord Howe
Islands)
+01:00 Denmark (Kopenhagen) +11:00 New Caledonia
(Noumea)
+01:00 France (Paris) +11:00 Russia (Srednekolymsk
Time)
+01:00 Germany (Berlin) +11:30 Norfolk Island
+01:00 Hungary (Budapest) +12:00 New Zealand
(Wellington, Auckland)
+01:00 Italy (Rome) +12:00 Russia (Kamchatka
Time)
+01:00 Luxembourg
(Luxembourg)
+12:45 New Zealand (Chatham
Islands)
+01:00 Macedonia (Skopje) +13:00 Tonga (Nukualofa)
+01:00 Netherlands
(Amsterdam)
+13:30 Chatham Islands
+01:00 Namibia (Windhoek) +14:00 Kiribati
Configuring NTP Server
You can set a NTP time server for the desired area as required. The NTP time server address can be
offered by the DHCP server or configured manually.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Date&Time.
• On your VCS, go to More > Settings > Basic > General > Date & Time.
For VP59, tap > Settings > Basic > General > Date & Time.
•
On your CTP20/CTP18, tap > Settings > Basic > General > Date & Time.
2. Configure and save the following settings:
Parameter Description Configuration Method
Manual Time/Time Type Select Off/SNTP Setting to
obtain the time and date from
the NTP server automatically.
Web user interface
Endpoint
CTP20/CTP18
DHCP Time
Enable or disable the system to
update time with the offset time
offered by the DHCP server.
Note: the default value is Off. It
is only available when the time
zone is GMT 0.
Web user interface

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm