Yealink CTP18 Administrator's Guide

| Configuring Camera Settings | 182
• Setting the Camera Presets
• Configuring Preset Synchronize With Active Camera
• Allowing the Remote System to Control Your Camera
• Configuring Multi-Camera Default Layout
• Resetting the Camera
Selecting and Setting Cameras
You can select a camera, enable or disable the selected camera, or customize the camera name. This
feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > Camera.
2. Configure and save the following settings:
Parameter Description Configuration Method
Camera Configure the desired camera.
Web user interface
Status
Enable or disable the selected camera.
Default: On.
It is not applicable to MeetingEye 600/
MeetingEye 400/PVT960/PVT940/VC200/
VC200-E/VC500/PVT950.
Web user interface
Camera Name
Customize a name for the camera.
Web user interface
Viewing Camera Status
About this task
This feature is not applicable to VP59.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Camera Info.
• On your VCS, go to More > Settings > System Status > Camera.
•
On your CTP20/CTP18, tap > Settings > System Status > Camera.
2. You can view the following camera status:
Parameter Description Configuration Method
Camera Name
Customize a name for the
camera.
Web user interface
Model The VCS codec model.
Endpoint
IP The IP address of the selected
camera.
Web user interface

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm