Yealink CTP18 Administrator's Guide

| System Maintenance | 261
2. Configure and save the following settings:
Parameter Description Configuration Method
Module Log Level
Specify the module log level.
• All—all modules
• Driver
• System
• Service
• Connectivity
• Video & Audio
• Protocol
• Deploy
• Web
• App
• Talk
The available levels are as
below:
• 0
• 1
• 2
• 3
• 4
• 5
• 6
Default: all, 6. If you set the
log level for a specified module
and then set the log level for
all modules, the log level of
a specified module will be
overwritten by the log level of all
modules.
Web user interface
Exporting the Log Files to a Local PC
Procedure
1. On your web user interface, go to Setting > Configuration > Local Log.
2. In the Enable Local Log field, select On.
3. Reproduce the issue.
4. Click Export.
Note:
The severity level of the exported Module Log will not be greater than the local Log Level. For
example: If you set Local Log Level to 3 and set Talk log Level to 6, the exported Talk log Level
will still be 3 in your exported local log. If you set Local Log Level to 5 and set Talk log Level to 4,
the exported Talk log Level will be 4 in your exported local log.

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm