EasyManuals Logo
Home>Yealink>Touch Panel>CTP18

Yealink CTP18 Administrator's Guide

Yealink CTP18
281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
| Configuring Network Settings | 90
Some issues, such as the video packet loss and delay may cause the video images distorted and
unclear. To ensure acceptable visual quality for video, video packets emanated from the system should be
configured with a high transmission priority.
Data QoS
To ensure better presentation, data packets (PC content) emanated from the system should be configured
with a high transmission priority. DSCPs for audio, video and data packets can be specified respectively.
• Configuring QoS
Configuring QoS
Procedure
1. Do one of the following:
• On your web user interface, go to Network > Advanced > QoS.
• On your VCS: go to More > Settings > Network Setting > Wired Network > Advanced Network >
QoS.
For VP59, tap > Settings > Network Setting > Wired Network > Advanced Network > QoS.
•
On your CTP20/CTP18, tap > Settings > Network Setting > Host Network > Advanced
Network > QoS.
2. Configure and save the following settings:
Parameter Description Configuration Method
QoS Enable
Enable or disable the QoS
feature.
Note: the default value is Off.
If you change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Audio Priority
Configure the DSCP
(Differentiated Services Code
Point) for audio packets.
Note: the default value is 63.
The greater the number is,
the higher the priority is. If you
change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18
Video Priority/
Video Priority (0-63)
Configure the DSCP
(Differentiated Services Code
Point) for video packets.
Note: the default value is 34.
The greater the number is,
the higher the priority is. If you
change this parameter, the
system will reboot to make the
change take effect.
Web user interface
Endpoint
CTP20/CTP18

Table of Contents

Other manuals for Yealink CTP18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink CTP18 and is the answer not in the manual?

Yealink CTP18 Specifications

General IconGeneral
Aspect ratio16:10
Display diagonal8 \
Display resolution1280 x 800 pixels
Touchscreen technologyCapacitive
Built-in speaker(s)No
Ethernet LANYes
Mounting typeWall/Tabletop
Product colorBlack, Grey
RJ-45 ports quantity1
Cables includedLAN (RJ-45)
Power source typeDC
Power consumption (typical)7 W
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width202 mm
Height151 mm

Related product manuals