Yealink CTP18 Administrator's Guide

| Getting Started | 43
LED Status Description
Slowly flashing
red
The shutter switch is open, but the local video is disabled during a video call.
Off The phone is powered off.
The camera is not properly connected to the phone.
The shutter switch is closed.
LED Instructions of VCC22 Video Conferencing Camera
LED Status Description
The VC880/VC800/PVT980 system is powered on.
The VC880/VC800/PVT980 is upgrading firmware.
Solid green
The VCC22 video conferencing camera is working.
The VC880/VC800/PVT980 system is in sleep mode.
Solid red
The VCC22 video conferencing camera is disabled.
Flashing red The VCC22 video conferencing camera is upgrading firmware.
Solid orange The VCC22 video conferencing camera is not selected.
Off The VCC22 video conferencing camera is not connected to the PoE switch.
LED Instructions of CTP20
LED Status Description
Solid green VCS codec is powered on.
Solid red CTP20 is in sleep mode.
Solid orange CTP20 is not connected to VCS codec.
Mute Indicator LED of CP960 Conference Phone
LED Status Description
The CP960 conference phone is initializing.Solid red
The CP960 conference phone is muted.
Flashing red The CP960 conference phone is ringing.
The CP960 conference phone is placing a call.Solid green
The CP960 conference phone is in a call and unmuted.
The CP960 conference phone is idle.Off
The CP960 conference phone is disconnected to the video conferencing system.

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm