Yealink CTP18 Administrator's Guide

| Basic Settings | 120
Parameter Description Configuration Method
Time Zone
Configure the time zone. For
more information on available
time zone, refer to Time Zone.
Note: the default value is +8
China (Beijing).
Web user interface
Endpoint
CTP20/CTP18
NTP Primary Server/Primary
Server
Configure the NTP primary
server.
Default: pool.ntp.org.
Web user interface
Endpoint
CTP20/CTP18
NTP Secondary Server/
Secondary Server
Configure the NTP secondary
server.
Default: pool.ntp.org.
Web user interface
Endpoint
CTP20/CTP18
Synchronism (15~86400s)
Configure the interval (in
seconds) to update time and
date from the NTP server.
Default: 1000 seconds.
Web user interface
Configuring the DST
You can set Daylight Saving Time (DST) for the system according to the location. By default, the DST is set
to Automatic, so it can be adjusted automatically from the current time zone configuration.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Date&Time.
• On your VCS, go to More > Settings > Basic > General > Date & Time.
For VP59, tap > Settings > Basic > General > Date & Time.
•
On your CTP20/CTP18, tap > Settings > Basic > General > Date & Time.

Yealink CTP18 Specifications

General

Aspect ratio	16:10
Display diagonal	8 \
Display resolution	1280 x 800 pixels
Touchscreen technology	Capacitive
Built-in speaker(s)	No
Ethernet LAN	Yes
Mounting type	Wall/Tabletop
Product color	Black, Grey
RJ-45 ports quantity	1
Cables included	LAN (RJ-45)
Power source type	DC
Power consumption (typical)	7 W

Weight and Dimensions

Depth	100 mm
Width	202 mm
Height	151 mm