Name: Yealink CTP18
Brand: Yealink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

| System Maintenance | 258

Resetting the SD card of VP59

You can reset the SD card (local storage) of VP59 to clear all captured screenshots or recorded videos.

Procedure

1. Do one of the following:

• On your web user interface, go to Setting > Upgrade > Reset Built-in SD Card.

For VP59, tap > Settings > Advanced > System Settings > Reboot & Reset > Reset Built-in

Setting Card.

The page prompt whether or not you are sure to reset.

2. Confirm the action.

Resetting the System

Generally, some common issues may occur while using the system. You can reset your system and

camera to factory configurations after you have tried all troubleshooting suggestions.

• Resetting the System via Configuration Methods

• Resetting the System by using Reset Button

• Resetting VP59 by REDIAL key

Resetting the System via Configuration Methods

Procedure

1. Do one of the following:

• On your web user interface, go to Setting > Upgrade > Reset to Factory Setting.

• On your VCS, go to More > Settings > Advanced > Reboot & Reset > Reset.

For VP59, tap > Settings > Advanced > System Settings > Reboot & Reset > Reset.

•

On your CTP20/CTP18, tap > Settings > Advanced > System Settings > Reboot & Reset >

Reset.

It prompts whether or not you are sure to reset.

2. Confirm the action.

Resetting the System by using Reset Button

You can use the Reset button to reset the system. No Reset Key on VP59.

Procedure

On your video conferencing system or the VCC22 video conferencing camera, using tiny object (for

example, the paper clip) to press and hold the reset button for 15 seconds until the monitor turns black.

Other manuals for Yealink CTP18

Questions and Answers:

Need help?

Do you have a question about the Yealink CTP18 and is the answer not in the manual?

General