Yealink CTP20 User Manual

| Configuring Camera Settings | 182
• Setting the Camera Presets
• Configuring Preset Synchronize With Active Camera
• Allowing the Remote System to Control Your Camera
• Configuring Multi-Camera Default Layout
• Resetting the Camera
Selecting and Setting Cameras
You can select a camera, enable or disable the selected camera, or customize the camera name. This
feature is not applicable to VP59.
Procedure
1. On your web user interface, go to Setting > Camera.
2. Configure and save the following settings:
Parameter Description Configuration Method
Camera Configure the desired camera.
Web user interface
Status
Enable or disable the selected camera.
Default: On.
It is not applicable to MeetingEye 600/
MeetingEye 400/PVT960/PVT940/VC200/
VC200-E/VC500/PVT950.
Web user interface
Camera Name
Customize a name for the camera.
Web user interface
Viewing Camera Status
About this task
This feature is not applicable to VP59.
Procedure
1. Do one of the following:
• On your web user interface, go to Setting > Camera > Camera Info.
• On your VCS, go to More > Settings > System Status > Camera.
•
On your CTP20/CTP18, tap > Settings > System Status > Camera.
2. You can view the following camera status:
Parameter Description Configuration Method
Camera Name
Customize a name for the
camera.
Web user interface
Model The VCS codec model.
Endpoint
IP The IP address of the selected
camera.
Web user interface

Yealink CTP20 Specifications

General

Aspect ratio	16:9
Screen shape	Flat
Display diagonal	13.3 \
Touch technology	Multi-touch
Touchscreen type	Multi-user
Touchscreen technology	Capacitive
Number of simultaneous touchpoints	10
Product color	Black
Power consumption (typical)	7 W
Ethernet LAN (RJ-45) ports	1
OmniTapps Multitouch compatibility	No
Wi-Fi standards	Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (without stand)	196 mm
Width (without stand)	321.5 mm
Height (without stand)	118 mm