| Configuring Call Settings | 212
2. Configure and save the following settings:
Parameter Description Configuration Method
First Conference Call
Configure the conference call
preferences.
• Auto
• Dial
• Directory
• History
• Start Conference
Default: Auto. If you have logged in
to a YMS or a Yealink cloud account,
the default value is Start Conference.
Otherwise, the default value is Dial.
Web user interface
Setting the Contact Display Label CTP20/CTP18
The contact interface displays all contact groups by default, including all Cloud contacts/YMS contacts (if
you log in to a YMS/ Cloud accounts), local contacts, and LDAP contacts. If the contact is not commonly
used, you can choose to hide the contact list. You can also set the default contact tab based on frequently
used contacts so that when you select a contact, you can locate the corresponding contact list to find the
desired contact quickly.
Procedure
1. On your web user interface, go to Setting > Touch Panel > Directory.
2. Configure and save the following settings:
Parameter Description Configuration Method
Enterprise
Enable or disable to display the list of Yealink
Cloud /YMS contacts.
Note: It is enabled by default. It can be
configured only when logging in to a YMS or
Yealink Cloud account.
Web user interface
Device
Enable or disable to display the devices
account list.
Note: It is enabled by default. It can be
configured only when logging in to a YMS or
Yealink Cloud account.
Web user interface
VMR
Enable or disable to display the VMR list.
Note: It is enabled by default. It can be
configured only when logging in to a YMS or
Yealink Cloud account.
Web user interface
To Next Page
Loading...
Need help?
General
Weight and Dimensions
