Printer screen
Figure 55: Printer screen
This screen allows definition of the necessary communications parameters for the printer. Refer to
Printing for details of the printer connections and setup.
Table 156: Display only
Field/LED
name
Access level Description
Time
remaining
until next
Print
–
Displays the time until the next print log will occur, if the function is
enabled.
Table 157: Programmable
Button Access level Description
Log Start
Time
Operator Sets the time at which the scheduled print logs automatically print.
Output
Interval
Operator
Define the interval at which log printing will occur. (1 minute to 1440
minutes, Default = 60 minutes)
Automatic
Printer
Logging
(Enabled/
Disabled)
Operator
Enable the printer to begin printing status reports beginning at the
programmed start time and recurring at the interval defined above.
Printer Type Service
Define the printer type connected to the chiller system (Okidata,
WeighTronix, Epson, Seiko, PC, Default = PC).
159YK-EP Style B Centrifugal Chiller
To Next Page
Loading...
Need help?
General