Zebra DS8108 User Manual

Symbologies 11 - 97
Macro PDF Features
Macro PDF is a special feature for concatenating multiple PDF symbols into one file. The scanner can decode
symbols encoded with this feature, and can store more than 64 Kb of decoded data from up to 50 MacroPDF
symbols.
Flush Macro Buffer
Scan the following bar code to flush the buffer of all decoded Macro PDF data stored to that point, transmit it to the
host device, and abort from Macro PDF mode.
Abort Macro PDF Entry
Scan the following bar code to clear all currently-stored Macro PDF data in the buffer without transmission and
abort from Macro PDF mode.
CAUTION When printing, keep each Macro PDF sequence separate, as each sequence has unique identifiers.
Do not mix bar codes from several Macro PDF sequences, even if they encode the same data. When
scanning a Macro PDF sequence, scan the entire sequence without interruption. When scanning a
mixed sequence, two long low beeps (low / low) indicate an inconsistent file ID or inconsistent
symbology error.
Flush Macro PDF Buffer
Abort Macro PDF Entry

Zebra DS8108 Specifications

General

Cables included	USB
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	LED
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, GS1 DataBar Expanded, Interleaved 2 of 5, MSI, Plessey, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39
Input voltage	5 V
Power consumption	450 mA
Power source type	-
PC connection	RS-232/USB
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black
International Protection (IP) code	IP42
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	154 g