Zebra DS8108 User Manual

13 - 10 DS8108 Digital Scanner Product Reference Guide
IDC Width
Parameter Name: DocCap_WIDTH
Parameter # 598
SSI # F1h 56h
This parameter only applies when IDC Operating Mode is set to Anchored. Specify the width of the region to
capture.
Scan the following bar code, and then scan four bar codes from Appendix B, Numeric Bar Codes in the range of
0000 to 1279. The default is 0300.
IDC Height
Parameter Name: DocCap_HEIGHT
Parameter # 599
SSI # F1h 57h
This parameter only applies when IDC Operating Mode is set to Anchored. Specify the height of the region to
capture.
Scan the following bar code, and then scan four bar codes from Appendix B, Numeric Bar Codes in the range of
0000 to 1279. The default is 0050.
IDC Width
IDC Height

Zebra DS8108 Specifications

General

Cables included	USB
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	LED
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, GS1 DataBar Expanded, Interleaved 2 of 5, MSI, Plessey, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39
Input voltage	5 V
Power consumption	450 mA
Power source type	-
PC connection	RS-232/USB
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black
International Protection (IP) code	IP42
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	154 g