4 - 2 TC56 Touch Computer Integrator Guide for Android Version 6.0.1
4. On the host computer, open a file explorer application.
5. Locate the TC56 as a portable device.
6. Open the SD card or the Internal storage folder.
7. Copy files to and from the TC56 or delete files as required.
Transferring Files using Photo Transfer Protocol
1. Connect the Rugged Charge/USB Cable to the TC56 or place the TC56 into the 1-Slot USB/Charge Only
Cradle. See Chapter 2, Accessories for setup information.
2. Pull down the Notification panel and touch USB for Charging.
Figure 4-2 Use USB Dialog Box
3. Touch Photo transfer (PTP).
4. On the host computer, open a file explorer application.
5. Open the SD card or the Internal storage folder.
6. Copy or delete photos as required.
Disconnect from the Host Computer
1. On the host computer, unmount the device.
2. Remove the Rugged Charge/USB cable from the device or remove the device from the cradle.
NOTE Use Photo Transfer Protocol (PTP) to copy photos from either the microSD card or internal memory to the
host computer.
CAUTION Carefully follow the host computer’s instructions to unmount the microSD card and disconnect USB
devices correctly to avoid losing information.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
