Zebra TC56 Integrator Guide

5 - 18 TC56 Touch Computer Integrator Guide for Android Version 6.0.1
•Network - Enables logging of network items (IP address, default gateway, etc).
• Bluetooth - Enables logging of Bluetooth items (Bluetooth power, discoverable, connected, etc).
•GPS - Enables logging of GPS data (position, speed, etc).
• GPS update frequency - Specifies the frequency of GPS updates requested from the system. This setting
can greatly affect battery life when using the tool. Frequent GPS updates will use a lot of power and the
effects are greater if the device is indoors where a position cannot be obtained.
•Light - Enables logging of ambient light.
Snapshot Plug-in
• Enable Plugin - Enables logging for this plug-in.
•Log path - Specifies the base path to use to store the snapshot files
•Log filename - Specifies the base filename for all the snapshot files. This file number will be appended to
this base filename when saving the snapshot.
• Log interval - Specifies the interval, in milliseconds, on which to invoke a detailed snapshot.
• Time to keep - Specifies the interval, in milliseconds, to keep snapshot files on the file system.
•CPU Info - Enables detailed per process CPU logging in the snapshot.
• Memory Info - Enables logging of detailed per process memory usage in the snapshot.
• Battery Info - Enables logging of detailed power information including battery life, on time, charging, and
wake locks.
• Processes - Enables dumping the complete process list in the snapshot.
•Threads - Enables dumping all processes and their threads in the snapshot.
• Properties - Enables dumping of all system properties on the device. This includes build/version information
as well as state information.
• Network Usage - Enables dumping of all available network interfaces and the routing table.
• Filesystems - Enables dumping of the available volumes on the file system and the free storage space for
each.
• Usage stats - Enables dumping of detailed usage information for each package on the device. This includes
the number of starts and duration of each run.
Logcat Plug-in
Logcat is an essential debugging tool on Android devices. RxLogger provides the ability to record data from all four
of the available logcat buffers. The Logcat plug-in has the ability to collect data from multiple logcat buffers
provided by the system. Currently these are the main, event, radio, and system buffers. Each of the settings are
available for each buffer independently unless otherwise noted.
• Enable Plugin - Enables logging for this plug-in.
•Log path - Specifies the high level log path for storage of all logcat logs. This setting applies globally to all
logcat buffers.

Zebra TC56 Specifications

General

Display diagonal	5 \
Touch technology	Dual-touch
Touchscreen type	Capacitive
Display resolution	1280 x 720 pixels
Flash memory	0.016 GB
Internal memory	0.002 GB
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash), MicroSDHC
Maximum memory card size	128 GB
Processor family	Qualcomm
Processor frequency	1.8 GHz
Operating system version	6.0
Operating system installed	Android
RFID reader	-
Certification	WFA (802.11n, 802.11ac, WMM-AC, Voice Enterprise, WMM-PS), Miracast WFA (Mobile AP / Personal Hotspot)
Product color	Black, Silver
Linear (1D) barcodes supported	Code 39
International Protection (IP) code	IP67
Battery capacity	4300 mAh
Data network	CDMA, EDGE, GPRS, GSM, HSPA, HSPA+, LTE, UMTS
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
GSM bands supported	850, 900, 1800, 1900 MHz
Security algorithms	AES, EAP-TTLS, FIPS 140-2, LEAP, MSCHAPv2, PEAP, TKIP, WEP, WPA, WPA2, WPA2-Enterprise
WCDMA bands supported	850, 1900 MHz
Second camera	No
Rear camera resolution (numeric)	13 MP
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	155 mm
Width	75.5 mm
Height	18.6 mm
Weight	249 g