F350 User Manual
102
support.
Connecting to TTY Equipment
10. Connect the cable from the TTY device into the ZTE TTY-to-USB connector.
11. Plug the USB connector into the jack on the side of the phone.
12. Enter the TTY Mode menu and select the desired TTY Mode (shown above).
13. After setting the TTY mode, check the LCD screen on the phone for the TTY icon.
14. Connect the TTY equipment to the power source and turn it on.
15. Make a phone connection to the desired number.
16. When a connection is made, use the TTY equipment to send a text message, or
speak (for TTY+Talk mode).
17. The voice or text message from the other party will be heard or displayed on the
TTY equipment, depending on the TTY mode selected.
One Touch Dial
Allows you to initiate a speed dial call by pressing and holding the speed dial digit. If
set to Off, Speed Dial numbers designated in your Contacts will not function.
Voice Privacy
Allows you to set additional voice privacy for CDMA calls. By default, CDMA already
offers inherent voice privacy. Check with your service provider for availability.
To Next Page
Loading...
Need help?
General
