Parameter Value
Output delay
0 to 1 50 µs
1 to 0 200 µs
Output data length 1 byte
Output current
Rated current per channel (max.) 0.5 A at UP 24 V DC
Rated current per group (max.) 1 A
Rated current (all channels together,
max.)
1 A
Lamp load (max.) 5 W
Max. leakage current with signal 0 0.5 mA
Output type Non-protected
Protection type External fuse on each channel
Rated protection fuse (for each channel) 3 A fast
Demagnetization when inductive loads are
switched off
Must be performed externally according to
driven load specification
Switching Frequencies
With inductive loads Max. 0.5 Hz
With lamp loads Max. 11 Hz at max. 5 W
Short-circuit-proof / Overload-proof No
Overload message No
Output current limitation No
Resistance to feedback against 24 VDC No
Connection of 2 outputs in parallel Not possible
Max. cable length
Shielded 500 m
Unshielded 150 m
6.2.3.9 Ordering data
Part no. Description Product life cycle phase *)
1SAP 187 000 R0003 TA5110-2DI2DOT: AC500, digital in/
output module option board, 2DI 24 V
DC, 2DO-T 24 VDC / 0.5 A, spring/
cable front terminal 3.50 mm pitch
Active
Spare parts
1SAP 187 400 R0014
**)
TA5220-SPF7: spring terminal block,
removable, 7-pin, spring front, cable
front, 6 pieces per packing unit
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
Option boards > TA5110-2DI2DOT - Digital input/output module option board
2021/06/293ADR010635, 2, en_US124
To Next Page
Loading...
Need help?
General
