116 ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A
Change password
Menu path
MENU → Configure → System → Changing Password
Password protection
Basic information on the subject of password protection can be found in the
Password protection section (see page 61).
Factory setting
User group Access to password levels Password
Every user 0 None
Maintenance team 0, 1 471100
Specialist team 0, 1, 2 081500
Function block specialist 0, 1, 2, 3 325465
Service specialist All 737842
Procedure
1 Select Change password menu item.
2 Select user group.
3 Enter old password.
4 Enter new password (6 digits).
5 Repeat new password.
6 Leave menu item using Back.
NOTICE
Password level 0 is not displayed in the Change password menu item.
CAUTION!
After entering the password for password level 3, the user can access all
of the function block applications. When configuring function blocks, ex-
isting applications with their configurations and links can be damaged or
destroyed!
CAUTION!
The user can change all passwords. Therefore it is strongly recommended
to document each password changing. Only ABB service is able to reset
the passwords to the factory setting.