8 ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A
Safety instructions
Intended use
Intended use
The ACF5000 analyzer system is designed for continuous measurement of
the concentration of individual components in gases or vapors.
Any other use is not approved.
The intended use also includes taking note of this operating instruction.
The analyzer system may not be used for the measurement of ignitable
gas/air or gas/oxygen mixtures during normal service. The analyzer system
may not be set up in potentially explosive atmospheres.
In normal service, the interior of the analyzer system contains no potentially
explosive atmosphere. Accordingly, installation of explosion protection in
the interior is not necessary for operation of the analyzer system.
Safety instructions
Requirements for safe operation
In order to operate in a safe and efficient manner the device should be
properly handled and stored, correctly installed and set-up, properly oper-
ated and correctly maintained.
Personnel qualifications
Only persons familiar with the installation, commissioning, operation and
maintenance of comparable devices and certified as being capable of such
work should work on the device.
Special information and precautions
These include
The content of this operating instruction,
The safety instructions affixed to the device,
The applicable safety precautions for installing and operating electrical
devices,
Safety precautions for working with gases, acids, condensates, etc.
National regulations
The regulations, standards and guidelines cited in this operating instruction
are applicable in the Federal Republic of Germany. The applicable national
regulations should be followed when the device is used in other countries.
To Next Page
Loading...
Need help?
General
