ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 51
Display
The display
The backlit chart display has a resolution of 320 x 240 pixels.
The display is split into three areas:
the menu line,
the information field and
the softkey line.
The menu line
The menu line appears only in menu mode. It is at the top edge of the display
and is separated by a line from the information field. The menu line displays
the current menu path and thereby offers the user orientation as to where
they are in the menu tree. In addition, it displays the name of the analyzer
being processed.
The information field in measuring mode
The information field displays in measuring mode the following information
by standard for every measuring component:
the measured value as figures and as a horizontal bar,
the unit of the measured value,
the designation of the measured component
the bottom and top final value of the measuring range on the horizontal
bar,
the analyzer type and
the analyzer name.
The measured value of up to six measured components can be displayed at
the same time.
The user can configure
what measured values are shown in the display and
where the display of measured value is in the display.
In addition, the user can configure the display elements that allow
entering values directly in measuring mode (see page 138) or
operating keys (see page 140).
NOTICE
Detailed information for display in measuring mode can be found in the
"Configuration: Display functions" section (see page 129).
The information field in menu mode
In menu mode the information field contains the menu or individual menu
items or parameters with the applicable values, as well as operator prompts.
The softkey line
The softkey line appears at the lower edge of the screen. Its gray back-
ground distinguishes it from the information field.
The softkeys are further explained in the "Softkeys" section (see page 56).
Error Mai nt Power
7
89
654
1
23
0
.
To Next Page
Loading...
Need help?
General
