ACF5000 FTIR ANALYZER SYSTEM | OI/ACF5000-EN REV. A 27
Power supply
Power supply
Voltage 230/400 VAC, 3 phases
1)
or
120/208 VAC, 3 phases
1)
or
100/200 VAC, 3 phases (via transformer),
± 10%, 48 to 62 Hz
Fuse (external) 3 x 20 A or 3 x 25 A
Power consumption approx. 2200 VA,
approx. 1500 VA
during power-up,
during operation
+ approx. 800 VA for heated probe tube
+ approx. 250 VA for heated filter unit
+ approx. 90 VA/m for heated sample gas line
+ approx. 1000 VA for air conditioner
+ approx. 350 VA for heated selector valve with "2nd measuring location"
option
1) L1, L2, L3, N, PE, current-carrying neutral is not allowed.
Uninterruptible power supply (UPS)
The option "prepared for UPS" is not possible in the case of a 100 VAC power
supply.
Voltage 230 VAC, 1 phase
1)
or
120 VAC, 1 phase
1)
,
48 to 62 Hz
Fuse (external) 20 A
Power consumption approx. 500 VA (incorporated into above values)
1) L, N, PE, current-carrying neutral is not allowed.
Service socket
230 VAC or 120 VAC, 48 to 62 Hz, max. 5 A.
The service socket is located in the cabinet light fixture.
To Next Page
Loading...
Need help?
General
