ABB REL650 User Manual

Data Value Data Valid Comm Valid Test
Receiver in test mode and incoming
data with q= Normal
Updated 1 1 0
Receiver in test mode and incoming
data with q= Test
Updated 1 1 1
Communication Error 0 0 0 0
The input of this GOOSE block must be linked either in SMT by
means of a cross or in ACT by means of a GOOSE connection (if
easy GOOSE engineering is enabled) to receive the double point
values.
The implementation for IEC 61850 quality data handling is
restricted to a simple level. If quality data validity is GOOD then
the DATAVALID output will be HIGH. If quality data validity is
INVALID, QUESTIONABLE, OVERFLOW, FAILURE or OLD
DATA then the DATAVALID output will be LOW.
17.4.8 GOOSE function block to receive an integer value
GOOSEINTRCV
17.4.8.1 Identification
GUID-93A1E81B-1DE8-483A-BB3B-DB771EE66DC1 v1
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
GOOSE function block to receive an
integer value
GOOSEINTRCV - -
17.4.8.2 Functionality
GUID-27B1ED7A-C8E8-499E-89C1-C656FB0337F8 v3
GOOSEINTRCV is used to receive an integer value using IEC 61850 protocol via
GOOSE.
17.4.8.3 Function block
GUID-56F0C9F7-98F3-4091-B071-53CA5074DC8F v1
IEC10000250-2-en.vsd
GOOSEINTRC V
BLOCK
^SRCINTOUT
^INTOUT
DATAVALID
COMMVALID
TEST
IEC10000250 V2 EN-US
Figure 345: GOOSEINTRCV function block
1MRK 506 382-UEN A Section 17
Station communication
Line distance protection REL650 2.2 IEC 681
Technical manual

ABB REL650 Specifications

General

Brand	ABB
Model	REL650
Category	Protection Device
Language	English