ABB SACE Tmax XT2 User Manual

1SDH002031A1002 ECN000092998 Rev. B SACE Tmax XT2 – XT4 | 12
Additional
functions
Ekip Touch can be equipped with additional software configurations that perform different
functions:
 Power Controller
 Load Shedding
 Interface Protections (IPS)
 Synchro reclosing
 Embedded ATS
For details see the Technical Catalog (see page 4) or the summary documentation for each
function (see page 12).
Support software
and
documentation
Various software and documentation are available – most of them for free – to facilitate, optimize,
and extend Ekip Touch functions and configurations in your system:
NOTE: some documents referred to in the following table refer to the SACE Emax 2
device, but can also be used with SACE Tmax XT2 - XT4
Name
Code
Description
Ekip Connect 3
--
ABB software to interface with Ekip Touch and other low-
voltage devices
Ekip Connect
Mobile
--
ABB app to interface with Ekip Touch via Bluetooth using a
smartphone/tablet
Ekip View
1SDH001276R0001
ABB software that supervises the communication network,
analyzes electrical values and monitors system conditions.
NOTE: clicking on the link will start the download of
a software package that requires about 1.3 GB of
space.
e-Design
--
ABB software suite that includes the following tools:
 DOC, to design single-circuit diagrams of low- and
medium-voltage electrical systems, choose the switching
and protection devices, and verify and coordinate the
protections.
 CAT, for technical/commercial estimates of ABB products.
 Curves, to draw, calibrate, and print the tripping curves of
protection devices.
 OTC, to verify the thermal behavior of panels and to size
the fans and air conditioners used therein.
 UniSec, to configure medium-voltage panels.
Front CAD
Software that offers graphic block libraries for ABB panel
products for use in the latest versions of AutoCAD, AutoCAD
LT, and IntelliCAD.
NOTE: clicking on the link will start the download of
a software package that requires about 190 MB of
space.
Ekip Link
1SDC200031L0901
Introduction to the Ekip Link panel control system
Adaptive
protections
1SDC007116G0201
White paper on adaptive protections
Power
Controller
1SDC007410G0901
White Paper on the Power Controller function
IPS
1SDC007117G0201
White Paper on the Interface Protection System (IPS) and
Interface Device (DDI)
Load shedding
1SDC007119G0201
White Paper on Load Shedding - Load shedding priority
Synchronism
and reclosing
1SDC007118G0201
White paper on Synchro reclosing synchronization solutions
Integrated ATS
1SDC007115G0201
White Paper on ATS systems for applications that require
continuity of service
Handbook
1SDC010002D0902
General overview of electrical systems

ABB SACE Tmax XT2 Specifications

General

Brand	ABB
Model	SACE Tmax XT2
Category	Circuit breakers
Language	English