ABB SmarTac User Manual

4.4 Exercise 2: using SmarTac to modify a displacement frame
4.4.1 Introduction
About one-dimensional search
SmarTac programming tools provide a simple way to search a part feature and
apply the search results to a program displacement frame. As seen in Exercise 1:
program displacement on page 35, using program displacements is an easy way
of shifting programmed robtargets. The most basic search is a one-dimensional
search. A one-dimensional search finds an offset in one direction.
What is Search_1D?
Search_1D is an instruction that is included in the SmarTac system module. Of
the three search instructions included in the module, this is the most common. It
is useful in a variety of situations and will be present in most of the exercises and
examples from this point on.
The instruction Search_1D is described in Search_1D - One-dimensional search
on page 81.
Application manual - SmarTac 41
3HAC024845-001 Revision: A
© Copyright 2004-2016 ABB. All rights reserved.
4 User's guide
4.4.1 Introduction

ABB SmarTac Specifications

General

Brand	ABB
Model	SmarTac
Category	Accessories
Language	English