Acer Aspire V3-551G User Manual

System Utilities 2-6
Security
The Security tab allows the user to configure and protect the computer from unauthorized use.
Figure 2:3. BIOS Security
NOTE:
When prompted to enter the password, three attempts are allowed before system halts.
Resetting the BIOS password may require the computer to be returned to the dealer.
Parameter Description
Supervisor Password Is
Displays “Set” if the supervisor password is set and “Clear” if the
supervisor password is not set.
User Password Is
Displays “Set” if the user password is set and “Clear” if the user
password is not set.
HDD Password Is
Displays “Set” if the HDD password is set and “Clear” if the HDD
password is not set.
Set Supervisor Password Option to set the supervisor password.
Set User Password
Option to set the user password. Enabled only when the supervisor
password is set.
Set HDD Password Option to set the HDD password.
Password on Boot
Enable or disable the computer to prompt for the password on
system boot. When disabled, the password is only prompted when
entering the
BIOS Setup Utility .
F9 Setup Defaults
F10 Save and Exit
F1
Esc
Help
Exit
Select Item
Select Menu
Enter
F5/F6
Select Sub-Menu
Change Values
InsydeH20 Setup Utility Rev. 3.7
Item Specific Help
Install or Change the password and the
length of password must be greater or
equal one word.
Supervisor Password Is: Clear
User Password Is: Clear
HDD Password Is: Clear
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot [Disabled]
Information Main Security ExitBoot

Acer Aspire V3-551G Specifications

General

Brand	Acer
Model	Aspire V3-551G
Category	Laptop
Language	English