System Utilities 2-10
Boot
The Boot tab allows the user to configure the order of boot devices used to load the operating
system.
Use
↑ and ↓ keys to select a device and press F5 or F6 to change the value.
Figure 2:10. BIOS Boot
F9 Setup Defaults
F10 Save and Exit
F1
Esc
Help
Exit
Select Item
Select Menu
Enter
F5/F6
Select Sub-Menu
Change Values
InsydeH20 Setup Utility Rev. 3.7
Item Specific Help
Use <ʅ> or <ʆ> to select a device, then
press <F5> to move it down the list, or
<F6> to move it up the list. Press <Esc>
to escape the menu
Boot priority order:
1. Network Boot : BRCM MBA Slot 0200 v15.0.11
2. USB FDD :
3. HDD0 : TOSHIBA MK7559GSXP
4. USB HDD :
5. USB CDROM :
6. ATAPI CDROM : MATSHITABD-CMB UJ160
Information Main Security ExitBoot
To Next Page
Loading...
Need help?
General