Root Commands
7750 SR OS Basic System Configuration Guide Page 89
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
processing. No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
port
atm
Syntax port port-id atm [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm aal-5 [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm ilmi [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm interface-connection [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvc [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvp [interval seconds] [repeat repeat] [absolute | rate]
port port-id atm pvt [interval
seconds] [repeat repeat] [absolute | rate]
Context monitor
Description This command monitors ATM port traffic statistics.
Parameters port-id — Specify up to 5 port IDs.
Syntax: port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle ID bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
atm — keyword specifying ATM information.
interface-connection — Monitors ATM interface statistics.
interval seconds — Configures the interval for each display in seconds.
Default 5 seconds
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without pro-
cessing. No calculations are performed on the delta or rate statistics.
Default Default mode delta
To Next Page
Loading...
Need help?
General
