Monitor CLI Commands
Page 90 7750 SR OS Basic System Configuration Guide
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed
instead of the delta.
Default Default mode delta
aal-5 — Displays ATM Adaptation Layer 5 (AAL5) information.
ilmi — Monitors ATM ILMI statistics.
pvc — Identifies the port by the PVC identifier (vpi/vci).
pvp — Identifies the port by the permanent virtual path.
pvt — Identifies the port by the permanent virtual tunnel.
oam — Identifies the port by the OAM test suite ID.
qos
Syntax qos
Context monitor
Description This command enables the context to configure criteria to monitor QoS scheduler statistics for spe-
cific customers and SAPs.
arbiter-stats
Syntax arbiter-stats
Context monitor>qos
Description This command enables the context to configure monitor commands for arbiter statistics.
sap
Syntax sap sap-id [arbiter name | root] [ingress | egress] [interval seconds] [repeat repeat]
[absolute | rate]
Context monitor>qos>arbiter-stats
Description This command monitors arbiter statistics for a SAP.
Parameters sap-id — Specify the physical port identifier portion of the SAP definition.
arbiter name — Specify the name of the policer control policy arbiter.
Values An existing scheduler-name in the form of a string up to 32 characters long com-
posed of printable, 7-bit ASCII characters. If the string contains special characters
(#, $, spaces, etc.), the entire string must be enclosed within double quotes.
root — Specify the scheduler to which this queue would be feeding.
ingress — Displays scheduler-name statistics applied on the ingress SAP.
To Next Page
Loading...
Need help?
General
