Rockwell Automation Publication 750-IN001P-EN-P - April 2017 131
Lift and Mount the Drive Chapter 3
Disconnect Control and
Power Wire Harnesses
AC Input Drives
1. Disconnect the cabinet fan/cabinet blower assembly wiring harness
from TB2-3 and TB2-4 (see number 1).
2. Disconnect the cabinet shunt trip harness (if used) from TB2-1 and
TB2-2 (see number 2).
Disconnect DC Bus Fuse Wire
Harness
AC Input Drives Floor Mount Frames 9 and Larger
Disconnect the DC bus wiring harness from TB6 (see number 1).
1
2
To Next Page
Loading...
Need help?
General
