Allen-Bradley 20F Installation Instructions

Rockwell Automation Publication 750-IN001P-EN-P - April 2017 9
Preface
Summary of Changes
This manual contains new and updated information as indicated in the
following table.
Topic Page
Added line to load installation guidelines to help installers find information. 12
Added Frame 7, 270 kW drive, to the f1 column in the catalog number explanation table 17
Added Frame 7, 400 Hp drive, to the f2 column in the catalog number explanation table 17
Removed this footnote from table ‘g’ regarding jumper.
“480V drives must select code ‘A’. Jumpers are included for field reconfiguration as
desired.”
18
Added Frame 7 C477 and D477 drive rating codes to the wall mount Frames 1…7 drive
rating cross-references table
19
Added Frame 7 477 code to the RF emission compliance and installation requirements
table
26
Updated the maximum surrounding air temperature for:
• Frames 6 and 7, 12…456 A drives
• Frame 7, 477 A drives
37
Updated approximate drive weights for Frame 7 270 kW and 400 Hp drives 39
Added data to the 400 volt AC and 540 volt DC input protection devices - wall mount
Frames 1…7 table:
• Frame 7, 270 kW rating
• Circuit breaker, dual element time delay fuse column
177
Added data to the 480 volt AC and 650 volt DC input protection devices - wall mount
Frames 1…7 table:
• Frame 7, 400 Hp rating
• Circuit breaker, dual element time delay fuse column
181
Added data to the 600 Volt AC and 810 Volt DC input protection devices – wall mount
Frames 3…7 table:
• Circuit breaker, dual element time delay fuse column
185
Added an attention statement for the 11-Series I/O module when used in an Integrated
Motion on EtherNet/IP networks application.
254
Added an attention statement for the 22-Series I/O module when used in an Integrated
Motion on EtherNet/IP networks application.
265
Added terminal block and wiring specification for the new Integrated Safety - Safe
Torque Off option module.
226
Corrected 22-Series I/O Module TB1 HW Input PTC Short Circuit Trip rating from = 300 Ω
to 80 Ω.
268
Added information for the new Integrated Safety - Safe Torque Off option module. 273
Added an important statement for PowerFlex® drives that support the use of the Dual
Incremental Encoder option module when used with the Safe Speed Monitor option
module.
287
Added an important statement for PowerFlex drives that support the use of the
Universal Feedback option module when used with the Safe Speed Monitor option
module.
291
Added an index. 313

Allen-Bradley 20F Specifications

General

Brand	Allen-Bradley
Model	20F
Category	Controller
Language	English