Allen-Bradley controllogix 1756-L55M12 User Manual

Publication 1756-UM001G-EN-P - January 2007
Configure PhaseManager 87
Manually Change States
With RSLogix 5000 programming software, you can manually change
an equipment phase.
To manually change a PhaseManager state, perform this procedure.
Compare PhaseManager to
Other State Models
You can compare PhaseManager state models to other state models.
Current Equipment Phase
1. Take ownership of the equipment phase.
2. Give a command.
S88 PackML PhaseManager
Idle Starting ⇒ Ready Resetting ⇒ Idle
Running ⇒ Complete Producing Running ⇒ Complete
Pausing ⇒ Paused Standby Subroutines or breakpoints
Holding ⇒ Held Holding ⇒ Held Holding ⇒ Held
Restarting None Restarting
Stopping ⇒ Stopped Stopping ⇒ Stopped Stopping ⇒ Stopped
Aborting ⇒ Aborted Aborting ⇒ Aborted Aborting ⇒ Aborted

Allen-Bradley controllogix 1756-L55M12 Specifications

General

Brand	Allen-Bradley
Model	controllogix 1756-L55M12
Category	Controller
Language	English