200 Rockwell Automation Publication 2080-UM002G-EN-E - March 2015
Appendix C Quickstarts
9. Click Finish to complete.
If the Micro830/Micro850 still shows up as a 1756 Module, then you are
probably running pre-release firmware which is reporting itself as Major
Revision 0, which does not match the embedded EDS file. To confirm,
right click the device and select Device Properties (firmware Revision is
Major.Minor).
Configure Controller
Password
Set, change, and clear the password on a target controller through the Connected
Components Workbench software.
To Next Page
Loading...
Need help?
General
