Rockwell Automation Publication 2080-UM002G-EN-E - March 2015 231
User Interrupts Appendix D
2. In the User Interrupt Configuration window, configure this POU as a User
Fault routine.
User Interrupt Instructions
STIS - Selectable Timed Start
STI0 is used in this document to define how STIS works.
Instruction Used To: Page
STIS – Selectable
Timed Start
Use the STIS (Selectable Timed Interrupt Start) instruction to
the start the STI timer from the control program, rather than
starting automatically.
231
UID – User Interrupt
Disable
Use the User Interrupt Disable (UID) and the User Interrupt
Enable (UIE) instructions to create zones in which user
interrupts cannot occur.
232
UIE – User Interrupt
Enable
234
UIF – User Interrupt
Flush
Use the UIF instruction to remove selected pending interrupts
from the system.
235
UIC – User Interrupt
Clear
Use this function to clear Interrupt Lost bit for the selected
User Interrupt(s).
236
STISSTIS
STIS(name or Pin ID)
or ENO(Pin ID)
Enable
IRQType
SetPoint
To Next Page
Loading...
Need help?
General
