10 Rockwell Automation Publication 7000-UM202D-EN-P - May 2018
Preface
What Is Not in This Manual
This manual provides information specific to maintaining the PowerFlex 7000
“B” Frame drive. This document does not include topics such as:
• Physically transporting or siting the drive cabinetry
• Installing or commissioning procedures
• Dimensional and electrical drawings generated for your order
• Spare parts lists compiled for your order.
Rockwell Automation provides the site- and installation-specific electrical and
design information for each drive during the order process cycle. If they are not
available on site with the drive, contact Rockwell Automation.
If you have multiple drive types or power ranges, ensure you have the correct
documentation for each specific PowerFlex 7000 product:
• “A” Frame for lower-power air-cooled, configurations (up to
approximately 1250 hp/933 kW)
• “B” Frame for higher-power, air-cooled configurations (standard or
heatpipe models)
• “C” Frame for all liquid-cooled configurations
General Precautions
ATTENTION: This drive contains ESD (electrostatic discharge) sensitive parts
and assemblies. Static control precautions are required when installing,
testing, servicing or repairing this assembly. Component damage may result
if ESD control procedures are not followed. If you are not familiar with static
control procedures, reference Allen-Bradley™ publication 8000-4.5.2
,
“Guarding Against Electrostatic Damage” or any other applicable ESD
protection handbook.
ATTENTION: An incorrectly applied or installed drive can result in component
damage or a reduction in product life. Wiring or application errors, such as,
undersizing the motor, incorrect or inadequate AC supply, or excessive
ambient temperatures may result in malfunction of the system.
ATTENTION: Only personnel familiar with the PowerFlex 7000 Variable
Frequency Drive (VFD) or Adjustable Speed Drive (ASD) and associated
machinery should plan or implement the installation, startup, and
subsequent maintenance of the system. Failure to comply may result in
personal injury and/or equipment damage.
To Next Page
Loading...
Need help?
General
