Allen-Bradley PowerFlex 755T Installation Instructions

32 Rockwell Automation Publication 750-IN100B-EN-P - July 2017
Chapter 3 Prepare for Installation
Minimum Clearances
The product must be mounted in a vertical orientation. Observe the clearance
requirements that are shown in the following figures.
The overhead clearance requirements that are indicated in Figure 7
allow access
to the exhaust hoods and cooling fan housings.
Figure 7 - Minimum Overhead Clearances
200 mm
(7.9 in.)
250 mm
(9.8 in.)
IP21, UL Type 1 IP54, UL Type 12

Allen-Bradley PowerFlex 755T Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 755T
Category	Adapter
Language	English