SP1 1, E Ld 1 and LUC 1
VALUE SAT FRI THUR WED TUE MON SUN ON/OFF
243 ON ON ON ON OFF OFF ON ON
245 ON ON ON ON OFF ON OFF ON
247 ON ON ON ON OFF ON ON ON
249 ON ON ON ON ON OFF OFF ON
251 ON ON ON ON ON OFF ON ON
253 ON ON ON ON ON ON OFF ON
255 ON ON ON ON ON ON ON ON
* Factory default setting.
Table 8
How to Program Special Vend 1 Start Minute
SP1 2
This option allows the owner to set the minute that Special Vend
1 will begin.
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
2 appears in the display.
2.
When SP1 2 appears in the display, press the START (enter)
keypad. The current start minute will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value to the desired minute.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Start Hour SP1 3
This option allows the owner to set the hour that Special Vend 1
will begin.
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
3 appears in the display.
2.
When SP1 3 appears in the display, press the START (enter)
keypad. The current start time (in military time) will appear in
the display.
NOTE: The hours will be displayed in military time.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the start value to the desired hour.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Start Date SP1 4
This option allows the owner to set the date of the month that
Special Vend 1 will begin.
1. Press the DELICATES (∧) or the COLDD (∨) keypad to
scroll through the programmable Special Vend 1 options until
SP1 4 appears in the display.
2.
When SP1 4 appears in the display, press the START (enter)
keypad. The current start date will appear in the display.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the start date to the desired date.
NOTE: If “off” is selected and Special Vend 1 is on,
Special Vend 1 will occur at the time and days of
week selected, regardless of the date.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Start Month
SP1 5
This option allows the owner to set the month that Special Vend 1
will begin.
NOTE: If Special Vend 1 Start Month, Start Date, End
Month, or End Date are programmed to zero (default is
zero), the Special Vend 1 will be active every week on
the days programmed in Table 8 .
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
5 appears in the display.
2.
When SP1 5 appears in the display, press the START (enter)
keypad. The current start month will appear in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
53 Part No. 204370ENR1
To Next Page
Loading...
Need help?
General