Communications Mode
Infra-red Communications
The Infra-red Communications feature allows the washer control
to communicate with an external device. The washer control can
be programmed and have its data read without using the keypad.
It may also be used to start and stop various diagnostic tests.
How to Begin Communications with an External
Device
The control will go blank and the display will show -C- until the
communication is complete. If an error occurs that terminates
communication, the display will show EIXX (XX represents the
error code).
NOTE: The Infra-red Communications option must be
turned on.
Card Reader Communications - Card
Models Only
The Card Reader Communications feature allows the washer con-
trol to communicate with the card reader. The washer control can
be programmed for a limited number of options and have its data
read without using the keypad.
Network Communications
The Network Communications feature allows the washer control
to communicate with a network. The washer control can be pro-
grammed and have its data read without using the keypad.
Communications Mode
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
89 Part No. 204370ENR1
To Next Page
Loading...
Need help?
General