How to Program Special Vend 1 Wash Status
Agitate Steps Subtracted Minutes SP1 21
This option allows the owner to subtract time from any agitate
steps that have their status set to Wash in Special Vend 1.
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
21 appears in the display.
2.
When SP1 21 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
NOTE: To go back to the current programmable
Special Vend 1 option without changing the value,
press the WARM (<) keypad.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
keypad to enter the value of the digit and advance to the next
digit.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Cycle Modifier
Default Value SP1 22
This option allows the owner to set the default cycle modifier that
should be selected any time that Ready Mode is entered.
0 = Modifier LIGHT, 1 = Modifier MEDIUM, 2 = Modifier
HEAVY.
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
22 appears in the display.
2.
When SP1 22 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
NOTE: To go back to the current programmable
Special Vend 1 option without changing the value,
press the WARM (<) keypad.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
keypad to enter the value of the digit and advance to the next
digit.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Cycle Modifier
MEDIUM Key #1 Vend Price SP1 23
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
23 appears in the display.
2.
When SP1 23 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
NOTE: To go back to the current programmable
Special Vend 1 option without changing the value,
press the WARM (<) keypad.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
keypad to enter the value of the digit and advance to the next
digit.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Cycle Modifier
HEAVY Key #2 Vend Price SP1 24
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
24 appears in the display.
2.
When SP1 24 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
NOTE: To go back to the current programmable
Special Vend 1 option without changing the value,
press the WARM (<) keypad.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value of the active digit and the START
keypad to enter the value of the digit and advance to the next
digit.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Cycle Modifier
MEDIUM Key #1 Options SP1 25
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
25 appears in the display.
2.
When SP1 25 appears in the display, press the START (en-
ter) keypad. The current value will appear in the display.
NOTE: To go back to the current programmable
Special Vend 1 option without changing the value,
press the WARM (<) keypad.
3. Press the DELICATES (∧) or the COLD (∨) keypad to in-
crease or decrease the value to enable the desired options to
be active when the MEDIUM keypad is active. Refer to Table
1.
4. Press the START (enter) keypad when the correct value ap-
pears in the display. The new value is saved and the next op-
tion will appear in the display.
How to Program Special Vend 1 Cycle Modifier
HEAVY Key #2 Options SP1 26
1. Press the DELICATES (∧) or the COLD (∨) keypad to scroll
through the programmable Special Vend 1 options until SP1
26 appears in the display.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
57 Part No. 204370ENR1
To Next Page
Loading...
Need help?
General