•
Remove the intermediate gear cover
(2), the spacer washer (3) and slide off
from the gear pin (4).
•
Check and if necessary replace the
rubber O-ring (5)
Start-up system check
IF THE DUAL FREEWHEEL GEAR TOOTHING IS DEFORMED, THE STARTER MOTOR TOOTHING
MUST BE CHECKED AS WELL.
•
Check the dual freewheel gear tooth-
ing (1) and the dual intermediate gear
(2) to see if the material is damaged or
deformed.
•
In case of deformations or non-uniform
consumption of the gears, replace
them.
Generator side
ETX - STX 150 Engine
ENG - 73