5.5. Electric connection
Connect the product to a grounded socket which is protected by a fuse conforming to the
values on the Type Label. If the machine is used without grounding which conform to the
local regulations, our company will not be liable for any damages which may arise.
• The connection must be in compliance with national regulations.
• The power cable plug should be easily accessible after installation.
• Voltage and allowable fuse protection are specified in the rating plate affixed to the inner
part of the device. If the current value of the fuse in your house does correspond to the
values specified in its rating plate, request a licensed electrician to connect an appropriate
fuse.
• The specified voltage must be equal to your mains voltage.
• Do not connect to the extension cables or multiple outlets.
WARNING: If the product fails, it should not be operated without
being repaired. Risk of electric shock!
5.6. Adjustment of legs
If the product stands in an unbalanced way in the place you installed it, adjust its legs. Taking
help from someone to slightly lift the refrigerator will help you and facilitate this process.
WARNING: First disconnect the electrical connection of the
product. When the legs are adjusted, the product should not be
plugged in. There is risk of electric shock!
To Next Page
Loading...
Need help?
General
