SBS COSMOS
REFRIGERATOR 10.01.2014 / REV NO: 03
20
6. WATER CONNECTION
You can connect the refrigerator to a jug or directly to supply water depending on its model.
In order to make this connection, first you have to connect the water pipe to your refrigerator.
6.1. Connecting water pipe to the jug
To connect water to the refrigerator from the jug, a water pump is needed. Connect one end
of the water pipe coming out of the procured pump to the refrigerator as described below.
To let the pump reach to the desired efficiency, wait for 2-3
minutes after starting it.
You may also refer to the user manual of the pump while making
the water connection.
There is no need to use water filter if a jug is to be used.
After water connection is made, it is necessary to discharge the
air retained in the system. Otherwise, proper water flow cannot
be ensured.
1 2 3
4 5
• Attach one end of the water pipe into the water pipe inlet of the pump and the other
To Next Page
Loading...
Need help?
General
