E13 Error flashes
Check cables connected to control card
DC Input-Output socket (KN10) pins 1,
2 and 3
Remove the rear compartment wall of
the freezer and check whether there is
anything preventing the rotation of the
fan. If there is any problem, fix it.
Operate the refrigerator
Replace Freezer Fan
Yes No
E13:
Speed
Frz Fan
Error
Turn on the refrigerator
Operation is successful
If cables are disconnected, re-connect
them, turn on the refrigerator and check
Yes
No
Yes
Any errors on
display?
If the error still being
displayed?
If the error is still being displayed,
replace the control board