Need help?Do you have a question about the ARM MPS3 and is the answer not in the manual?
General| Brand | ARM |
|---|---|
| Model | MPS3 |
| Category | Motherboard |
| Language | English |
Describes the book's purpose, audience, structure, glossary, and conventions.
Instructions for providing comments and suggestions about the product and content.
Safety and damage prevention advice for using the MPS3 board.
Details the MPS3 board's features, uses, and major components.
Illustrates the physical layout and placement of components on the MPS3 board.
Introduces the MPS3 board's FPGA and peripheral infrastructure.
Presents a reference design for the MPS3 board's IoT kit subsystem.
Describes the fixed and programmable clock sources for the MPS3 board.
Explains the board's reset system and powerup sequencing.
Details how to supply power to the MPS3 board and its specifications.
Describes the SCC interface for configuring the FPGA via the MCC.
Explains the interface between the MCC and the FPGA's Static Memory Controller.
Details the SMC interface for USB 2.0 and Ethernet controllers.
Describes the implementation of an HDLCD interface using the HDMI connector.
Explains the stereo audio interface with Line In, Line Out, and Mic In.
Details the on-board CLCD display panel and its interface.
Describes the user LEDs, switches, and push buttons connected to the FPGA.
Lists peripheral interrupt signals connecting to external FPGA pins.
Details the 4GB DDR4 SODIMM and its interface to the FPGA.
Describes the QSPI flash, eMMC, and microSD card interfaces.
Explains the two Shield and four Pmod expansion interfaces.
Covers high-speed expansion using the FMC-HPC standard connector.
Details various methods for performing debug and trace on the MPS3 board.
Specifies minimum RTL and configuration settings for minimal board operation.
Explains the Motherboard Configuration Controller's role in board setup.
Describes how to control the MCC remotely via the Debug USB port.
Details the sequence of events during board powerup and configuration.
Explains the function of software (PBON) and hardware (PBRST) reset buttons.
Describes configuration files and microSD card directory structure.
Details system command-line input to the MCC via UART.
Lists connectors for processor debug, FPGA debug, trace, and SWD.
Describes the two Shield expansion interfaces with digital and analog I/O.
Details the four Pmod connectors for digital I/O expansion.
Covers the 400-way connector for FMC expansion boards.
Describes the 14-pin connector for configuring Arm FMC boards.
Details the connector for Ethernet 10/100 and USB 2.0 controllers.
Describes the connector for digital video and audio to external displays.
Explains the three stereo jack connectors for audio input/output.
Details the DC power jack for connecting external power to the board.
Lists maximum current the board can supply to expansion boards.
Lists technical changes between released issues of the document.
To Next Page
