Autronica AUTROSAFE 4 User Manual

Verifying the System Before Startup
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 21
7. Verifying the System Before
Startup
Before verifying the system, all parts in all system units must be
installed and properly connected, and all panels and AutroFieldBus
units must be addressed correctly.
Installation, cabling and connections
 Verify all internal cabling in all system units (all panels)
 Verify that all IO modules in the Fire Alarm Control Panel and
Controller are installed in the cabinet
 Verify all external connections in the Fire Alarm Control Panel and
Controller (to detector loops, other input / output connections)
 Verify all network connections
 Addressing
 Verify that all AutroFieldBus units (Power Boards BSF-400) are
addressed correctly
 Verify that all panels are assigned correct Panel IDs
 Verfiy that all panels are assigned Network IDs
 Check power for correct mains voltage

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English