Autronica AUTROSAFE 4 User Manual

Introduction
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 5
1. Introduction
E-1676
This product contains static-sensitive devices.
Always use an antistatic wrist strap / ground bracelet to avoid any
electrostatic discharge.
1.1 About the Handbook
This handbook is intended to provide all necessary information for the
commissioning of the AutroSafe Interactive Fire Detection System,
Release 4.
The handbook covers the commissioning of a standalone system (Fire
Alarm Control Panel), as well as the commissioning of a distributed
system with several system units, operating on Autronica’s local area
network; AutroNet, including:
 Power Boards in Power Cabinet BP-405 and
Power Unit BPS-405/BPS-410 (AutroFieldBus addressing)
 Fire Alarm Control Panel BS-420
 Controller BC-420 / BC-440
 Operating Panel BS-430
 Repeater Panel BU-BV-420
1.2 The Reader
The handbook is intended to be used by Autronica Fire and Security
trained service and technical personnel who are responsible for the
installation of the AutroSafe Interactive Fire Detection System,
Release 4.

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English