Autronica AUTROSAFE 4 User Manual

Startup Procedure
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 34
8.7 Entering Required Access Levels
All user interface controls are classified as belonging to one of the
different access levels described below:
Access Level
Access Remedy
Description
1 No key or password
required.
Accessible by members of the general public. All mandatory
indications are visible at access level 1 without prior manual
intervention.
2 Access by key. Accessible by persons having a specified responsibility for
safety.
3 Password restricted. Accessible by persons trained and authorized to do
reconfiguration of site specific data and maintenance
according to the manufacturer’s published instruction.
To be able to verify the system after an upgrade, Access Level 2 must
be entered. Access Level 2 is accessed by the key (turn the key
counter-clockwise).
Access level 3 is entered as described in the procedure below.
Step
Actions to be taken
Display Indication
1
To enter the Main Menu from normal Operation
Mode, press
2
To select SYSTEM, press 4.
19:23
MAIN MENU
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
6 OUTPUT CONTROL
19:23
MAIN MENU
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
6 OUTPUT CONTROL
SYSTEM
1 DATE AND TIME
2 INFORMATION
3 ACCESS LEVEL 3
4 PRINTER
5 CHANGE LANGUAGE
6 INITIALIZE
7 DAY/NIGHT TIMERS
19:23
SYSTEM
1 DATE AND TIME
2 INFORMATION
3 ACCESS LEVEL 3
4 PRINTER
5 CHANGE LANGUAGE
6 INITIALIZE
7 DAY/NIGHT TIMERS
19:23

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English