Autronica AUTROSAFE 4 User Manual

Startup Procedure
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 30
8.5 Uploading Configuration Files to the System
When the IP addressing is completed, configuration files can be
uploaded to the system from one central point (any BS-420/BS-430
panel in the system).
Autrosafe software version 4.5.0
Config model 4.5
Market version: Land
Switch address 01-001
Searching for panels, found 2
BS-420 01.01: 4.3.1 Commiss. Star
BU-420 01.01: 4.3.1 Commiss. Star
Config missing
Verify config on switch settings
3. Upgrade software 4. Upgrade config
6. Reboot panels
 Press 4 (Upgrade config).
Autrosafe software version 4.5.0
Config model 4.5
Market version: Land
Switch address 01-001
Searching for panels, found 2
BS-420 01.01: 4.3.1 Commiss. Star
BU-420 01.01: 4.3.1 Commiss. Star
Insert USB stick in USB port
 Insert the USB memory stick into one of the USB host ports on the
BSA-400 Controller Board.

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English