Autronica AUTROSAFE 4 User Manual

Startup Procedure
Commissioning Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-COMMISS/EGB Rev.F, 2014-04-01,
Autronica Fire and Security AS
Page 29
8.4 Configuration File
8.4.1 Name, Format and Extension
The AutroSafe Configuration Tool generates the following compressed
file:
AC_Vnn_mm_filename.tar.bz2
 AC
AutroSafeConfiguration
 Vnn
Main interface model number
 mm
Sub interface model number
 filename
The AutroSafe configuration file name, valid characters are
[0-9a-zA-Z] and underscore '_'. If the filename contains non-valid
characters the file name will be replaced with the name
"Configuration".
The zip file cannot contain more than 127 characters, if so the
filename will be truncated.
8.4.2 Copying the Zip File to a USB Stick
Make sure to copy and paste the files in the root directory of the USB
stick. Also make sure to remove all other files from the memory stick.
 When the configuration zip file is generated by means of the
AutroSafe Configuration Tool, copy the file to a USB memory stick
(root catalogue).

Autronica AUTROSAFE 4 Specifications

General

Brand	Autronica
Model	AUTROSAFE 4
Category	Measuring Instruments
Language	English