BMW R 1100 RS User Manual

00.30
Checking/adjusting valve operating
clearances
(Inspection I, II, III)
•
Check valve clearance with feeler gauge and, if
necessary, correct with adjusting nut/lock.
Adjust valve clearances with the engine cold
(max. 35°C):
Inlet.......................................... 0.15 mm ( 0.006 in)
Exhaust.................................... 0.30 mm (0.012 in )
X Tightening torque:
Locknut.......................................................... 8 Nm
•
Check valve clearance again; it must be possible
to insert the feeler gauge between valve stem
and rocker with only slight resistance to move-
ment.
•
Assemble in reverse order
e Caution:
Make sure that gasket is correctly seated. Gaskets
and sealing faces must be free from oil or grease
X Tightening torqu
Cover screw................................................... 8 Nm
Spark plug (without lubricant)....................... 20 Nm
RS110980

BMW R 1100 RS Specifications

General

Displacement	1085 cc
Transmission	5-speed
Final Drive	Shaft drive
Engine Type	Air/oil-cooled flat twin (boxer)
Power	66 kW (90 hp) at 7, 250 rpm
Torque	95 Nm at 5500 rpm
Front Suspension	Telelever
Rear Suspension	Paralever
Front Brakes	Dual disc
Rear Brakes	Single disc
Fuel Capacity	22 liters
Seat Height	800 mm
Wheelbase	1471 mm